Welcome to Classic Cabinet Hardware Liquidators

 

 
  Ke33-1ty.tif (128304 bytes) Ke34-1ty.tif (122870 bytes)
 
 
 
  KE31-1 KE32-1 KE33-1 KE34-1
  Ke35-1ty.tif (128766 bytes) Ke36-1ty.tif (130992 bytes) Ke37-1ty.tif (115414 bytes) Ke38-1ty.tif (367300 bytes)
 
 
 
  KE35-1 KE36-1 KE37-1 KE38-1
  Edge Guards
   
 

 KE31-1:  Overall size:  90º x up to 42"   -  ID:  1-11/16"  -   Return:  7/8"

For Non-Beveled stile on single acting door.   -  BHMA = J204  /  Br, Bz, SS
 
 

KE32-1:  Overall size:  93º x up to 42"    -  ID:  1-11/16"  -  Return:  7/8"

For stiles beveled 1/8" in 2" on single acting door.  -  BHMA = J205  /  Br, Bz, SS
   
   

 KE33-1:  Overall size:   90º x up to 42"   -  OD:  1-3/4"  -   Return:  7/8"

For Non-Beveled stile on Double acting door.  -  BHMA = J210  /  Br, Bz, SS
   
   

KE33-2:  Overall size:   93º x up to 42"   -  OD:  1-3/4"  -   Return:  7/8"

For Beveled stile on Double acting door.  -  BHMA = J210  /  Br, Bz, SS
   
   

    KE34-1:  Overall size:   93º x up to 42"   -  OD:  1-3/4"  -   Return:  7/8"

Double Acting.  For radius stile on double acting door.  -  BHMA = J205  /  Br, Bz, SS
   
   

    KE35-1:  Overall size:  90º x up to 42"   -  ID:  1-11/16"  -   Return:  1-1/4"

For Non-Beveled stile on single acting door.   -  BHMA = J201  /  Br, Bz, SS
   
   

KE36-1:  Overall size:  93º x up to 42"   -  ID:   1-11/16"  -  Return:  1-1/4"

For stiles beveled 1/8" in 2" on single acting door.   -  BHMA = J202  /  Br, Bz, SS
   
   

KE37-1:  Overall size:   90º x up to 42"   -  ID:  1-3/4"  -   Return:  1-1/4"

For Non-Beveled stile on Double acting door.  -  BHMA = J207  /  Br, Bz, SS
   
   

KE37-2:  Overall size:   93º x up to 42"   -  ID:  1-3/4"  -   Return:  1-1/4"

For Beveled stile on Double acting door.  -  BHMA = J207  /  Br, Bz, SS
   
   

  KE38-1:  Overall size:   93º x up to 42"   -  ID:  1-3/4"  -   Return:  1-1/4"

Double Acting.  For radius stile on double acting door.  -  BHMA = J209  /  Br, Bz, SS
   
     
    Note:  For angle edge guards, we suggest 1/16" less than door thickness.  For edge guards, specify: Handing, Mortise, Non-Mortise, Bevel, Non-Bevel, No Cutouts, With Cutouts.  Need Drawing on all Cutouts and Special Screw Locations.  Holes are drilled approximately 3/8" from edge and spaced six inches apart.  Do not pre-drill doors.  Include drawings for all special screw patterns, cutouts.  Over 42" by quote.   Tolerance on all dimensions +/- 1/16".